Environmental Code of Practice for integrated steel mills: bibliography


Bibliography

Aloe, Andrew, Impact of the Clean Air Act Amendments of 1990 on By-Product Coke Oven Production for Blast Furnaces and Compliance Paths, 1998 ICSTI/Ironmaking Conference Proceedings.

Apogee Research et al., Steel Manufacturing Sector Strategic Options Process, Final Phase I Report, prepared for Environment Canada, January 29, 1997.

British Columbia Steel Task Force, Development of Pollution Control Criteria for Integrated Iron and Steel Production, prepared by Charles E. Napier Company Ltd., November 1996.

Canada Centre for Mineral and Energy Technology, Canadian Steelmaking By-product Wastes, Mineral Sciences Laboratories Division Report MSL 94-20 (R), April 1994.

Canadian Council of Ministers of the Environment, Canada-Wide Standard for Benzene - Basic Overview, December 7, 1998, www.ccme.ca.

Canadian Council of Ministers of the Environment, Canada-Wide Standard for Mercury Update, August 20, 1998, www.ccme.ca .

Canadian Council of Ministers of the Environment, Canada-Wide Standards for Dioxins and Furans - Basic Overview, December 7, 1998, www.ccme.ca .

Canadian Council of Ministers of the Environment, A Strategy to Fulfil the CCME Commitment to Pollution Prevention, May 1996. www.ccme.ca

Canadian Standards Association, Guideline for Pollution Prevention, Z754-94, ISSN 0317-5669, June 1994.

Canadian Steel Producers Association, STEEL, Spring 1997, Vol. 3, No. 2.

Canadian Steel Producers Association Website, CSPA Policies 1997-8 Environment, downloaded Feb. 11, 1998.

Canadian Steel Producers Association Website, Steel and the Environment, downloaded Feb. 11, 1998.

Charles E. Napier Company Ltd. and Amendola Engineering, Background Reports prepared for the Steel Manufacturing Sector Strategic Options Report, December 9, 1996.

Energy, Mines and Resources Canada, The Production of Primary Iron in Canada: Managing the Air Quality Challenges, Mineral Policy Sector, Coal and Ferrous Division, March 1993.

Environment Canada, Compilation of Environmental Performance Standards for the Steel Manufacturing Sector, prepared by Charles E. Napier Company Ltd. and C.C. Doiron & Associates, March 31, 1999.

Government of Canada, Pollution Prevention - A Federal Strategy for Action, June 1995.

Hatch Associates Ltd., Releases and Control of Priority and Other Substances of Concern from the Iron and Steel Industry in Canada, prepared for Environment Canada, March 9, 1995.

Industry Canada, Sector Competitiveness Frameworks, Primary Steel, Metals and Minerals Processing Branch, 1996.

International Iron and Steel Institute, The Management of Steel Plant Ferruginous By-Products, Committee on Environmental Affairs and Committee on Technology, 1994.

Iron and Steel Society Inc., Proceedings of the Process Technology Conference, Part I: Environmental Concerns in the Iron and Steel Industry; Part II: Environmental Concerns in Mechanical Working; Part III: Environmental Concerns in Electric Furnace Steelmaking, 1994.

Jones, Jeremy A.T., "Interactions Between Electric Arc Furnace Operations and Environmental Concerns", Iron and Steel Engineer, December 1995.

Lake Michigan Forum, Mercury Pollution Prevention Initiative, Voluntary Agreement Between the Lake Michigan Forum, Indiana Department of Environmental Management, U.S. Environmental Protection Agency and Bethlehem Steel Burns Harbor, Ispat Inland Inc. Indiana Harbor Works, and U.S. Steel Gary Works, September 25, 1998.

Lake Michigan Forum, "Three Indiana Steel Mills to Cut Mercury Use", Mercury Fact Sheet, September 25, 1998.

Maedgen, D.R. and H.D. Hunt, "An Update on Project STAR: Zero Waste Program at Chaparral Steel", Iron and Steelmaker, January 1998.

McMaster Symposium No. 21, Pretreatment and Reclamation of Dusts, Sludges and Scales in Steel Plants, McMaster University, May 1993.

Queen's Printer for Ontario, Pollution Prevention Planning Guidance Document and Workbook, Ontario, 1993, ISBN 0-7778-3963-6.

Renz, o. Prof. Dr. ver. Nat. Otto, et al., Emission Control at Stationary Sources in the Federal Republic of Germany - Vol. II Heavy Metal Emission Control, French-German Institute for Environmental Research, University of Karlsruhe (TH), January 1997.

Simpson, Dr. Alison E., and Mr. Edmund Mangan, The Effects of Governmental Policy on Costs and Competitiveness - Iron and Steel Sector, Steel Committee, OECD, November 1997.

Smithyman, C.M., "Alternate Iron Sources for the EAF," Iron and Steelmaker, August 1996.

United Nations Economic Commission for Europe, The 1998 Aarbus Protocol on Heavy Metals, June 24, 1998.

United Nations Economic Commission for Europe, The 1998 Aarbus Protocol on Persistent Organic Pollutants (POPs), June 24, 1998.

United Nations Environment Programme, Industry and Environment, Steel Industry and the Environment Technical and Management Issues, Technical Report No. 38, 1997.

U.S. Environmental Protection Agency, Facility Pollution Prevention Guide, EPA/600/R-92/088, Office of Solid Waste and the Risk Reduction Engineering Laboratory, May 1992.

U.S. Environmental Protection Agency, Multi-Media Investigation Manual, EPA-330/9-89-003-R, Office of Enforcement, National Enforcement Investigations Center, Revised March 1992.

U.S. Environmental Protection Agency, Profile of the Iron and Steel Industry, EPA-310-R-95-005, Office of Enforcement and Compliance Assurance, September 1995.

United States Steel, The Making, Shaping and Treating of Steel, 10th Edition, Association of Iron and Steel Engineers, 1985.

World Bank Group, Pollution Prevention and Abatement Handbook, Pre-publication version, August 1998, World Bank.

Page details

Date modified: