Skip booklet index and go to page content

Emission Estimation Calculators - Booklet 1

Anthracite Coal Combustion (stoker fired boilers)

The burning of anthracite coal in stoker fired boilers results in releases of Metals (Part 1 Substances), Polycyclic Aromatic Hydrocarbons (Part 2 Substances) and Criteria Air Contaminants (Part 4 substances).

Download spreadsheet calculator: Anthracite Coal Combustion – Industrial, Commercial/Institutional Boilers [xls 61 KB] (4 Feb 2009)

Suggested estimation methodology for Part 1, 2, 3 Releases: Emissions Factor

The general equation for emissions estimation is:

E = A x EF

where:

  • E = emissions
  • A = activity rate
  • EF = emission factor

Input Data

A = Anthracite Coal Burned [tonnes per year]
B = Ash Content of Coal [percent]
C = Sulphur Content of Coal [percent]

Substance Releases

Parts 1, 2, 4 Substance Releases
Substance NameChemical Abstracts Service Registry Number (CAS RN)Footnote1PartEmission Factor (EF)Footnote2EF Units
Arsenic7440-38-219.50E-05kilograms (kg)/tonne
Ammonia7664-41-710.00028kg/tonne
Biphenyl92-52-411.25E-02kg/tonne
Cadmium7440-43-913.55E-05kg/tonne
Chromium7440-47-311.40E-02kg/tonne
Lead7439-92-114.45E-03kg/tonne
Manganese7439-96-511.80E-03kg/tonne
Mercury7439-97-616.50E-05kg/tonne
Naphthalene91-20-316.50E-02kg/tonne
Nickel7440-02-011.30E-02kg/tonne
Selenium7782-49-216.50E-04kg/tonne
Phenanthrene85-01-823.40E-03kg/tonne
Carbon Monoxide (CO)630-08-040.3kg/tonne
Sulphur Dioxide (SO2)Footnote*7446-09-54C x 19.5kg/tonne
Oxides of Nitrogen (NOx), expressed as nitrogen dioxide (NO2)11104-93-144.5kg/tonne
Volatile Organic Compounds (VOCs)Footnote***40.035kg/tonne
Total Particulate Matter (TPM)Footnote*Footnote***4B x 0.4kg/tonne
Particulate Matter less than or equal to 10 micrometers (µm) (PM10)Footnote**Footnote***42.4kg/tonne
Particulate Matter less than or equal to 2.5 µm (PM2.5)Footnote**Footnote***41.25kg/tonne

Note on Emissions Factors

The default emission factors are used in the table above, however if you have a site specific emission factor you would prefer to use you may enter it in the emission factor column. If you choose to insert your own emission factor ensure that the units have been converted accordingly. 

The emission factors used in this spreadsheet are based on uncontrolled emissions. If you are using an emission control device you will have to adjust the emissions calculated by this spreadsheet according to the following formula:

Controlled Emissions = Uncontrolled emission x ((100 - control efficiency)/100)

Page 3
Date modified: