Reference Method for Source Testing: Quantification of Carbon Dioxide Releases by Continuous Emission Monitoring Systems from Thermal Power Generation
| Previous | TOC | Next |
Units, Abbreviations and Acronyms
- avg
- average
- BAF
- bias adjustment factor
- BTU
- British thermal unit
- Bwa
- moisture content of ambient air in % of volume
- Bws
- moisture content of the stack gas in % of volume
- °C
- degree Celsius
- CEM
- continuous emission monitoring
- CFR
- U.S. Code of Federal Regulations
- cm
- centimetre
- CO2
- carbon dioxide
- |d|
- absolute difference
- DSm3/GJ
- dry standard cubic metre per gigajoule
- DSm3/MJ
- dry standard cubic metre per megajoule
- EGU
- electricity generating unit
- F-factor
- Fc, Fd or Fw
- Fc
- ratio of the carbon dioxide volume generated by the combustion of a given fuel to the
amount of heat produced in Sm3/MJ
- Fd
- ratio of the stoichiometric volume of dry gas generated by the complete combustion of a
given fuel with air to the amount of heat produced in DSm3/MJ
- Fw
- ratio of the stoichiometric volume of wet gas generated by the complete combustion of a
given fuel with dry air to the amount of heat produced in WSm3/MJ
- FS
- full scale
- g/GJ
- grams per gigajoule
- GJ/h
- gigajoules per hour
- GJ/MWh
- gigajoules per megawatt hour
- HHV
- higher heating value
- ISO
- International Organization for Standardization
- K
- Kelvin
- kg/GJ
- kilograms per gigajoule
- kg/h
- kilograms per hour
- kg/MWh
- kilograms per megawatt hour
- kg/Sm3
- kilograms per standard cubic metre
- kJ/kg
- kilojoules per kilogram
- kPa
- kilopascal
- m/s
- metres per second
- m3/GJ
- cubic metres per gigajoule
- m3/kg-mol
- cubic metres per kilogram mole
- m3/s
- cubic metres per second
- MJ/h
- megajoules per hour
- MJ/MWh
- megajoules per megawatt hour
- MJ/s
- megajoules per second
- MW
- megawatt
- MWh
- megawatt hour
- ng/J
- nanograms per joule
- O2
- oxygen
- OEM
- original equipment manufacturer
- OTP
- operational test period
- ppm
- parts per million
- QA
- quality assurance
- QA/QC
- quality assurance/quality control
- QC
- quality control
- RA
- relative accuracy
- RATA
- relative accuracy test audit
- RH
- relative humidity
- RM
- reference method
- Sm3/GJ
- standard cubic metres per gigajoule
- Sm3/h
- standard cubic metres per hour
- Sm3/MJ
- standard cubic metres per megajoule
- Sm3/MWh
- standard cubic metres per megawatt hour
- STDEV
- standard deviation
- U.S. EPA
- United States Environmental Protection Agency
- WSm3/GJ
- wet standard cubic metres per gigajoule
- WSm3/h
- wet standard cubic metres per hour
- WSm3/h/MW
- wet standard cubic metres per hour per megawatt
- WSm3/MJ
- wet standard cubic metres per megajoule
- %
- percentage