Alberta Environmental Protection, "Continuous Emission Monitoring System (CEMS) Code", Publication No. Ref. 107, May 1998.
ATCO Power, "CEM System - Performance Evaluations – Alternate Test Method for In-Situ SO2/NOx Analyzers", March 2005.
Government of Ontario, "Ontario Emissions Trading Code", January 2003.
International Organization for Standardization (ISO), "Stationary Source Emissions – Determination of the Mass Concentration of Sulfur Dioxide – Performance Characteristics of Automated Measuring Methods", ISO Standard 7935, 1989.
Jahnke, J., "Continuous Emission Monitoring", Second Edition, John Wiley and Sons, Inc., 2000.
Jahnke, J., "Monitoring Emissions Under a Regulatory Framework for the Electricity Sector", report prepared for Environment Canada, February 2008.
U.S. EPA, "40 CFR Parts 72 and 75 – Volumes I and II, Unofficial Version", Clean Air Markets Division, January 3, 2008.
U.S. EPA, "An Operator’s Guide to Eliminating Bias in CEM Systems", EPA/430/R-94-016, November 1994.
U.S. EPA, "EPA Traceability Protocol for Assay and Certification of Gaseous Calibration Standards", EPA-600/R-97/121, September 1997.
U.S. EPA, "Guidance for Implementation of Emission Monitoring Requirements for the NOx Budget Program", Acid Rain Division, June 1996.
U.S. EPA, "OTC Sources under the Federal NOx Budget Trading Program: Guidance on Changing Monitoring Methods and Upgrading Monitoring Plans to EDR v2.1", October 12, 2001.
U.S. EPA, "Part 75 Field Audit Manual", Clean Air Markets Division, July 16, 2003.
U.S. EPA, "Performance Specifications", U.S. Code of Federal Regulations, 40 CFR 60, Appendix A, July 2003.
U.S. EPA, "Plain English Guide to the Part 75 Rule", September 2005.
U.S. EPA, "Quality Assurance Procedures", U.S. Code of Federal Regulations, 40 CFR 60, Appendix F, 1991.